Monday Jul 15, 2024

How to Hang Wallpaper

How to Hang Wallpaper

If you want to learn how to hang wallpaper, there are a few steps you need to take before you can start hanging your new wall paper. Here are the three main steps that you must do before you begin hanging wallpaper: Preparation, using a ladder, and preparing the wall. You may also want to purchase a book or other reference material to assist you in the process. Follow these tips to successfully hang your new wallpaper!


If you plan on hanging wallpaper on your wall, there are a few things you should do before you begin the process. For one, you should prepare the wall properly before attempting to hang the wallpaper. Be sure to purchase wallpaper rolls that are not damaged and that match the design and colourway of the room. You should order them by batch number so that you can easily identify the correct placement for the wallpaper. To apply the paste, choose a high-quality brand like Farrow & Ball. It comes in powder form, a recyclable tube, and a measuring jug. A tube contains enough paste for five rolls of wallpaper.

After removing any wall decor, you should sand the wall to remove any bumps or creases. These bumps and creases can affect the appearance of the print. Once the surface is smooth, you can hang the wallpaper. If the wallpaper has a light texture, it won’t be a problem. Deeper textures, however, should be smoothed out. This step will ensure that every inch of the wallpaper’s surface is held against the wall.

Using a ladder

When hanging wallpaper, you will want to use a ladder to protect your floor. Make sure that it is stable and non-slip before beginning. Also, make sure that you do not have any damage to the ladder itself. If you do have damage, it may be better to use a smaller stepladder. Lastly, be sure to use a ladder that has rungs separated by at least 10 cm.

To use a ladder to hang wallpaper, you will need two people. One person will use a ladder while the other will stand on a platform. Ideally, you should work from a platform, as working from a ladder can be dangerous. Another way to make the process easier is to use wallpaper without any patterns. Pasted wallpaper can stretch out and make it difficult to match patterns. Hanging wallpaper from a stepladder is similar to hanging wallpaper in a room.

Preparing the wall

There are many advantages of prepping the wall before hanging wallpaper. Sizing the wall before hanging wallpaper is not necessary, but it can help the process go as smoothly as possible. You can hire an electric steamer from a hardware store, or use a warm water and vinegar solution to clean off old wallpaper. You will also need to sand the surface to remove any excess spackle and any remnant paper. This will ensure that the wallpaper’s surface will be held firmly against the wall.

Paint on the wall can be difficult to remove. Water-soluble paint should be scraped away using a wet cloth or sponge. Avoid soaking the wall with water, as this can damage plaster. Then allow the wall to dry before you hang the wallpaper. If the paint is not water-soluble, you should check it for any signs of flaking. If the paint is glossy, you should lightly sand it to a dull surface to create a key for the wallpaper paste.

Using a book

You can use wallpaper by using a book as a stencil. The pages of the book can be smoothed with a wallpaper brush. Once the paper has been applied, you can remove any paste with a kitchen sponge soaked in warm water. If you are unable to find a book, try old encyclopedias for their many pages. You can also use outdated encyclopedias that have an excess of pages.

To measure your wallpaper, first mark a horizontal line. Next, mark a vertical line on the wall from floor to ceiling. You can also draw a chalk line to mark the wall’s height. Use this mark to make sure the first strip of wallpaper is aligned with the wall. Then, measure the width and height of your wall. Once you’ve measured the width and height of your wall, it’s time to measure your wallpaper.

Using a wall sealant

Before hanging a new piece of wallpaper, you should remove the old paste. You can use a spray bottle of wallpaper paste remover, such as ROMAN Products’ PRO-458 GEL WALLPAPER PASTE REMOVER. The formula breaks down old paper paste quickly. To prevent a messy application, sand the wall lightly before applying the new wallpaper. After the sealant has dried, hang the new paper.

Depending on the type of wall sealant you use, you can choose a solution that offers both a low-sheen and dirt-repellent effect. Generally, a solution of one part water and one part liquid sealant can be applied to a wallpaper surface. A sealer coat can last for years, but it won’t solve the problem for good. Alternatively, you can use a latex paint and primer to fix the problem surface. You can also purchase problem-surface coatings from companies such as Zinsser’s Gardz and Scotch Paints’ Draw-Tite. If you decide to paint over the wallpaper, you’ll have to perform intensive preparation.


Planning how to hang wallpaper is essential for a successful installation. Start by measuring the width of the room and the sections that will be covered. Pick a starting point in the middle of the largest obstacle. Avoid difficult areas by adjusting the seam and measuring from there. If the area is difficult to cover, consider moving your starting point. Make sure you follow the directions of the installer. You can also use an extra roll of wallpaper if you make any mistakes.

Use a spirit level or plumb line to mark a vertical straight line on the wall. Make sure the pencil line is not covered by the first length of wallpaper. This will serve as a vertical guide while you are hanging the second length. Using a spirit level will help you avoid bumping into the walls or getting them smudged. Then, measure the lengths of the wallpaper and hang them at the same height.


Leave a Reply

Your email address will not be published.

Back to Top